1/2 Inch Bulk Soaker Hose

This 1/2 inch bulk soaker hose offers low and consistent water pressure that allows for an efficient flow of water directly to a plant’s root zones.

Outer Diameter: 0.70”
Inner Diameter: 0.50”
GPH: 142 per 100’ at 25 psi

There are NO fittings on this hose, which means you can cut to desired lengths to create your own custom system using our wide variety of soaker hose fittings.

$40.00$149.99

Product Information

A 1/2” soaker hose can be run in lengths of up to 150’, and it’s recommended that you not run more than 500’ of hose off any single water supply. 100’ of the 1/2” bulk soaker hose will run a flow rate of approximately 142 gallons per hour (GPH) at 25 psi, however that may vary depending on inlet pressure and water hardness. Generally, a shorter length of hose will result in higher GPH.

A soaker hose should be used on flat surfaces not exceeding 2’ rise over 100’. A pressure regulator is required because a soaker hose is designed to work at low pressure.

Features and Benefits of 1/2 Inch Bulk Soaker Hose

  • Eco-Friendly: Made from recycled materials, 70% from recycled rubber and 30% recycled polyethylene products that are re-pelletized for use in the process.
  • Conserves Water: When more water goes where you need it, less goes where you don’t.
  • Easy to Install: No special equipment is necessary. Easily attaches to outdoor spigot.